Air separation equipment manufacturers, air separation equipment manufacturing, air separation equipment production
Your current location: Home >> News >> Industry information

ContactContact Us

Hangzhou Zhongju Environmental Protection Technolo

Tel: 0571-63430098

Fax: 0571-63430098

Contact number: 18055990835 (Mr. Zhou)

website: www.zj-enzjhb.com

Email: hzzjkf@hzzjkf.com

Address: No.28, Yuancun Industrial Zone, Xindeng Town, Fuyang District, Hangzhou, Zhejiang Province


Notes on safe use of nitrogen making plant

2020-12-12 H:21:36
second

Nitrogen production equipment is a kind of high-purity nitrogen production equipment designed and manufactured by pressure swing adsorption technology. Using air as raw material, high-quality carbon molecular sieve as adsorbent, pressure swing adsorption (PSA) principle and microporous molecular screening were used to selectively adsorb air, so as to achieve the purpose of oxygen and nitrogen separation. The device has the characteristics of simple process flow, high degree of automation, fast gas production speed (15 ~ 30 minutes), low energy consumption and high product purity. It can schedule production in a large range according to the needs of users. It has the advantages of convenient operation and maintenance, low operation cost and strong equipment adaptability. Therefore, it is more and more welcomed by the majority of users.

Nitrogen generation equipment should be used in special cabin with good ventilation, less dust, no water and drip, or in relatively clean tunnel. Let's talk about the safety operation of nitrogen fertilizer plant

1. Before start-up, carefully check the whole nitrogen making equipment and admit that there is no thing, part or other object left in the air compressor.

2. It is suggested that the vent valve should be in the vent state in the process of nitrogen production to avoid overpressure of the air compressor.

3. Welding operation shall not be carried out near the oil system, and the pressure vessel shall not be corrected by welding or other methods.

4. Check the reliability of safety equipment (such as safety valve) on time.

5. Equipment maintenance and maintenance must be carried out in case of power failure.

Production of nitrogen generating unit

Label